714 NG is a high-quality, fire-resistant lagging adhesive and coating to be used over moderate temperature insulation systems. 714 NG has a full bodied consistency which minimizes sagging and dripping during application and has excellent brushability.

714 NG is normally used in conjunction with lagging cloth to secure and seal pipe insulation (or similar types of insulation). When dry, it provides a tight moisture resistant bond between cloth and insulation, and a surface which is resistant to mild alkalis, asphalt, acids and salts.

714 NG CONTAINS NO ASBESTOS, LEAD, MERCURY OR MERCURY COMPOUNDS.

714 NG may be applied by brush, spray or roller; when cured, it presents a washable and repaintable surface. Palm grade is available upon request.

714 NG, until thoroughly cured, must be protected during and after application from: precipitation, freezing, oil, grease and foot traffic.

714 NG meets the following qualifications: Complies with MIL-A-3316C, Class 1 Passes Electric Boat 4013 Fire Test Meets MIL-DTL-24244D(SH) & NRC 1.36

NOTE: Do not thin. Protect from freezing.

Vimasco manufactures under a stringent quality-assurance program in accordance with MIL-I-45208. Our manufacturing and Quality Assurance procedures are routinely audited by government and private industry inspectors.

We do not include the SDS for these products on our website, these may be obtained by contacting our office at our regular address, phone, fax or e-mail.

In accordance with OSHA Standard 29 CFR 1910.12 (Right to Know Law) a Material Safety Data Sheet is available for the product and all Vimasco products.

Vimasco products are designed to meet the needs of specific situations. They are warranted to be effective for their intended uses only. No further warranties are expressed or implied. The methods and condition of application over which we can exercise no control are important factors in the performance of our products. We make specific recommendations for the application and use of all Vimasco products, but we cannot enforce our recommendations upon users; therefore, it is necessary that we state, as a condition of sale of our products, that we will replace or refund the purchase price of any Vimasco product found by our laboratories to be defective, but that we assume no responsibility beyond the purchase price of the materials. No representative of our Company, Distributor or Agent has any authority to change or extend this condition of sale.