713-R is a high-quality, fire-resistant lagging adhesive and coating to be used over moderate temperature insulation systems. 713-R has a full bodied consistency which minimizes sagging and dripping during application and has excellent brush-ability.
713-R is normally used in conjunction with lagging cloth to secure and seal pipe insulation (or similar types of insulation). When dry, it provides a tight moisture resistant bond between cloth and insulation, and a surface which is resistant to mild alkalis, asphalt, acids and salts.
713-R CONTAINS NO ASBESTOS, LEAD, MERCURY OR MERCURY COMPOUNDS.
713-R may be applied by brush, spray or roller; when cured, it presents a washable and repaintable surface. Palm grade is available upon request. 713-R, until thoroughly cured, must be protected during and after application from: precipitation, freezing, oil, grease and foot traffic.
NOTE: Do not thin. Protect from freezing. Can be supplied to meet MIL-DTL-24244D(SH) & NRC 1.36. U.S. Coast Guard Approval No. 164.112/138/0. approved for use under IMO requirements.
Complies with: MIL-A-3316C and latest amendment, Class 1, Grade A & B (QPL listed) Test reports showing specification compliance are available on each production batch of 713-R.
Product Information Data
COLOR
White – Grade A; Red – Grade B
VOC (Volatile Organic content, less water) (ASTM D 3960)
0 g/L (0 lb/gal)
MEETS REQUIREMENTS FOR LEED CREDIT 4.1
COVERAGE (ASTM C 461)
43 sq. ft/gal at .015 inch dry (1.03 m²/liter at .38mm)
WET FLAMMABILITY INFORMATION
No flash to boiling (212ºF) closed cup (ASTM D 93)
DRYING TIME (ASTM D 1640-69)
To touch: 2 hours; Through: 12 to 48 hours (Depending upon temperature and relative humidity.)
SURFACE BURNING CHARACTERISTICS
Tested at Underwriters Laboratories, Inc. (ASTM E 84-77a) at 51 sq.ft.gal. (.013) inch dry
Flame Spread: 0
Fuel Contributed: 0
Smoke Developed: 15
WEIGHT PER U.S. GALLON (ASTM D 1475-60)
11.2 pounds (1.34 kg/liter)
CLEANUP
Wet state – water
Dry state – safety solvent
SOLIDS
55% by weight; 41% ± 2% by volume
RECOMMENDED SHELF LIFE
18 months in unopened container at 40°F (4°C) to 90°F (32°C)
APPLICATION TEMPERATURE RANGE
40°F (4°C) to 120°F (49°C)