714 is a high-quality, fire-resistant lagging adhesive and coating to be used over moderate temperature insulation systems. 714 has a full bodied consistency which minimizes sagging and dripping during application and has excellent brush-ability.
714 is normally used in conjunction with lagging cloth to secure and seal pipe insulation (or similar types of insulation). When dry, it provides a tight moisture resistant bond between cloth and insulation, and a surface which is resistant to mild alkalis, asphalt, acids and salts.
714 CONTAINS NO ASBESTOS, LEAD, MERCURY OR MERCURY COMPOUNDS.
714 may be applied by brush, spray or roller; when cured, it presents a washable and re-paintable surface. Palm grade is available upon request.
714, until thoroughly cured, must be protected during and after application from: precipitation, freezing, oil, grease and foot traffic.
714 meets the following qualifications: Complies with MIL-A-3316C, Class 1; QPL Listed Passes Electric Boat 4013 Fire Test Can be supplied to meet MIL-DTL-24244D(SH) & NRC 1.36
NOTE: Do not thin. Protect from freezing.
Product Information Data
COLOR
White
APPLICATION TEMPERATURE RANGE
40°F (4°C) to 120°F (49°C)
COVERAGE (ASTM C 461)
60 sq. ft/gal at .015 inch dry (1.47 m²/liter at .38mm)
WET FLAMMABILITY INFORMATION
No flash to boiling (212ºF) closed cup (ASTM D 93)
DRYING TIME (ASTM D 1640-69)
To touch: 2 hours; Through: 12 to 48 hours (depending upon temperature and relative humidity)
VOC (Volatile Organic content, less water) (ASTM D 3960)
26 g/L
MEETS REQUIREMENTS FOR LEED CREDIT 4.1
WEIGHT PER U.S. GALLON (ASTM D 1475-60)
11.4 pounds (1.36 kg/liter)
CLEANUP
Wet state – water
Dry state – safety solvent
SOLIDS
76% by weight
68% ± 2% by volume
RECOMMENDED SHELF LIFE
12 months in unopened container at 40°F (4°C) to 90°F (32°C)
SERVICE TEMPERATURE RANGE
20ºF to 180ºF (-7ºC to 82ºC)