795 is a water-based latex insulation adhesive for bonding all types of insulation materials. It is off-white in the wet state and has the odor of a mild latex paint; it dries to a light tan film which securely bonds lightweight thermal insulation.
Because 795 is a water-based adhesive, it does not present the toxicity and flammability hazards associated with solvent based adhesives.
When 795 is used on rigid foam insulation, it should be applied to both surfaces and allowed to dry for a few minutes before bringing the two surfaces together. When used on galvanized or sheet steel, these surfaces should be given a prime coat with a primer approved by Vimasco prior to the use of the 795 adhesive.
795 may be applied by brush, roller or spray. 795 must be protected from freezing during storage. Until thoroughly cured it must be protected from precipitation, freezing, oil, grease, and foot traffic.
Product Information Data
COLOR
Light Tan
MOISTURE RESISTANCE
Excellent in dry state
COVERAGE (ASTM C 461)
300 sq. ft/gal at .006 inch wet (7.35 m²/liter) at (.15mm)
VOC (Volatile Organic content, less water) (ASTM D 3960)
40 g/L
MEETS REQUIREMENTS FOR LEED CREDIT 4.1
WEIGHT PER U.S. GALLON (ASTM D 1475-60)
10.0 pounds (1.20 kg/liter)
FIRE HAZARD CLASSIFICATION (ASTM E 84)
Flame Spread: 10
Fuel Contributed: 0
Smoke Developed: 0
SOLIDS
62% by weight
53% by volume
CAUTION
Do not add water to this product as that will change its physical properties and performance. No expressed or implied warranty will be offered on applications where the product has been thinned or altered.
SERVICE TEMPERATURE RANGE
20˚F to 180˚F (-7˚C to 82˚C)
APPLICATION TEMPERATURE RANGE
40°F (4°C) to 120°F (49°C)